تزويدك بحل احترافي

Desalination for Municipal Water Supply

الحل: Desalination for Municipal Water Supply

Municipal desalination brings reliable potable supply to coastal cities, islands and inland towns with brackish aquifers. Stark Water designs and integrates seawater RO (SWRO) and brackish RO systems with proven pretreatment, energy recovery, remineralization and SCADA control. Typical performance: salt rejection 98–99.7%, recovery 35–50% (seawater) or 65–85% (brackish), and specific energy ~2.5–4.0 kWh/m³ (SWRO) or ~0.7–1.5 kWh/m³ (brackish). We deliver drinking-water quality that meets regulatory targets with robust operations, training and lifetime support.

Desalination has become a vital solution for municipalities facing water scarcity due to population growth, climate change, and limited freshwater resources. By converting seawater or brackish water into potable water, desalination ensures a sustainable and reliable water supply for urban populations. STARK designs and delivers high-performance municipal desalination systems that integrate advanced membrane technologies, energy recovery devices, and robust pretreatment to ensure long-term efficiency, minimal environmental impact, and compliance with global drinking water standards.

Municipal Desalination Applications

  • Coastal Municipalities – Supplying cities located near the sea with a consistent source of potable water.

  • Island Communities – Providing reliable fresh water to remote islands where natural sources are limited.

  • Drought-Prone Regions – Securing municipal water supply during extended dry seasons or severe droughts.

  • Blending with Existing Sources – Supplementing surface or groundwater supplies to maintain quality and quantity.

Key Benefits

1. Sustainable Water Source – Reduces dependence on limited freshwater resources and mitigates drought risks.
2. High-Quality Output – Produces drinking water that meets or exceeds WHO and local regulatory standards.
3. Scalable Capacity – Modular designs allow for future expansion as municipal demand grows.
4. Optimized Energy Efficiency – Utilizes energy recovery devices to minimize operational costs and carbon footprint.

Our Solutions

Seawater desalination system2.1

Seawater Reverse Osmosis (SWRO) Plants

High-capacity desalination facilities designed for municipal-scale supply.

1718249079_Brackish-water-equipment

Brackish Water RO Systems

Cost-effective solutions for inland municipalities with saline groundwater sources.

AI-Powered Analytics

Integrated Pretreatment Systems

Multimedia filtration, ultrafiltration, and chemical dosing for reliable RO performance.

Energy Recovery Integration

Energy Recovery Integration

Pressure exchangers and turbines to maximize efficiency and reduce costs.

Specs & KPIs (typical ranges)

KPISeawater ROBrackish ROالملاحظات
Salt rejection99–99.7%98–99.5%Element & operating window dependent
Recovery35–50%65–85%Optimized by temperature, scaling risk
Specific energy~2.5–4.0 kWh/m³~0.7–1.5 kWh/m³With high-efficiency pumps; ERD for SWRO
Design flux12–20 Lmh14–24 LmhSeasonal/temperature dependent
Feed pretreatment targetSDI ≤ 3, turbidity < 0.5 NTUProtects membrane surface
Permeate TDS~250–500 mg/L~100–300 mg/LFinal set by remineralization & blending
CIP triggerΔP +15–20%, conductivity drift or normalized flux lossTrend-based control reduces fouling risk

Deliverables

  • Water balance and recovery analysis, energy model
  • P&ID, GA/Layout (nozzles, footprint, lifting points), and Electrical I/O list
  • SCADA graphics, alarm & interlock philosophy, FAT/SAT procedures
  • Commissioning checklist, O&M manuals, spare parts/BOM
  • Operator training and remote support SLAs

Case snapshots

Coastal City (SWRO) – 1,500 m³/d: Open-intake + DAF + UF pretreatment; SWRO with ERD. Energy ~3.1 kWh/m³, permeate TDS ~300 mg/L after remineralization; recovery 42%.

Inland Town (Brackish RO) – 800 m³/d: MMF + ACF + RO. Feed TDS ~3,000 mg/L, permeate TDS ~150 mg/L; recovery 75%; online turbidity & conductivity trending extended CIP cycles to 6 months.

لماذا تختار STARK؟

STARK is a trusted partner for municipal desalination projects worldwide, offering a full-service approach from feasibility studies and pilot testing to turnkey plant delivery and after-sales support. Our engineering expertise ensures each system is tailored to site-specific conditions, achieving optimal water quality, operational reliability, and cost-efficiency. With proven references in challenging environments, STARK’s solutions provide peace of mind for municipalities seeking long-term water security.

انتقل إلى الأعلى