Ofrecerle una solución profesional

es_ES Español
es_ES Español en_US English fr_FR Français de_DE Deutsch ru_RU Русский pt_PT Português ar العربية nl_NL Nederlands pl_PL Polski id_ID Bahasa Indonesia ja 日本語 ko_KR 한국어
Obtenga un presupuesto rápido
stainless-steel-mixing-tank-agitator-lab-cleanroom
stainless-steel-mixing-tank-agitator-studiov
stainless-steel-mixing-tank-agitator-studio
stainless-steel-mixing-tank-agitator-lab-cleanroom
stainless-steel-mixing-tank-agitator-lab-cleanroom
stainless-steel-mixing-tank-agitator-lab-cleanroom

Customization Liquid Mixing tank Price of Chemical Mixing tank Juice Blending tank Agitator Mixer

Stainless steel mixing tank with agitator for liquid blending in food, beverage, chemicals and cosmetics. Custom-built in SS304/316L with volume from 100–10,000 L, optional heating/cooling jacket, insulation, VFD speed control and CIP/SIP spray ball. Ideal for juice blending, polymer make-up and general liquid mixing.

Obtenga un presupuesto rápido

Descripción del producto

STARK designs and manufactures stainless steel mixing tank systems to deliver uniform, repeatable results across batch sizes. Depending on viscosity and process goals, the agitator can be propeller, turbine, or anchor/scraper with baffles to prevent vortexing. Variable-speed control allows gentle homogenization or high-shear dispersion when paired with a suitable impeller.

The vessel is fabricated from SS304/316L with sanitary welds and internal finish Ra ≤0.6–0.8 µm (typical). Options include a dimple or half-pipe heating/cooling jacket (steam, hot water, thermal oil or glycol), mineral-wool or PU insulation, load cells, temperature and level instrumentation, and top or bottom entry mechanical seal. A hinged manway and CIP spray ball speed up cleaning and changeover between recipes.

  • Open-top or closed-top with pressure/vacuum relief (atmospheric or slight pressure)
  • Sanitary tri-clamp ports, bottom outlet with butterfly/diaphragm valve
  • Skid or leg mounted; adjustable feet or casters
  • Control: local VFD panel or integrated PLC/HMI with interlocks and recipe steps

Note: Final sizing, impeller type and motor power are engineered from your product viscosity, target Reynolds number and heat load. We provide process datasheet review and CFD-inspired impeller selection on request.

Parámetros del producto

Technical Parameters

MaterialsSS304 or SS316L (wetted parts); gasket EPDM/FKM; optional PTFE seats
Volume (usable)100 / 300 / 500 / 1000 / 2000 / 3000 / 5000 / 10,000 L (custom on request)
Finish (internal)Ra ≤0.6–0.8 µm; external 2B or hairline; electropolishing optional
AgitatorTop or bottom entry; propeller/turbine/anchor/scraper per duty; with baffles
Speed RangePropeller 100–1500 rpm; anchor 10–65 rpm (VFD adjustable)
Motor Power≈0.75–15 kW typical (engineered per volume and viscosity)
JacketDimple or half-pipe for heating/cooling; media steam/hot water/glycol/oil
InsulationPU/mineral wool with SS cladding (optional)
Design PressureAtmospheric standard; slight pressure/vacuum ±0.1–0.3 MPa optional
PortsTri-clamp manway, CIP spray ball, temperature PT100, level, vent, bottom outlet
MountingSkid or 3/4-leg stand; adjustable feet or casters
Electrical380–415 V/50 Hz or 460 V/60 Hz; protection IP55; food-grade cables
ConformidadFood-grade fabrication; pressure test & FAT; CE/UL components on request
NotasValues are typical/configurable. Final BOM confirmed after datasheet review.

Industria aplicable

  • Food & Beverage — juice blending, syrup preparation, dairy mixing
  • Water Treatment — polymer/coagulant preparation, flocculant make-up
  • Chemical — emulsions, detergents, surfactants, additives
  • Cosmetics & Personal Care — lotions, shampoos, gel bases
  • Pharma & Biotech (non-pressure utility) — buffer/media prep
  • Paints & Coatings — dispersion and tint mixing

Ventaja Uno

Advantage 1 — Uniform Mixing & Thermal Control

  • Impeller matched to viscosity and Reynolds number for fast homogenization
  • Baffles minimize vortex and improve axial/radial flow
  • Heating/cooling jacket sized for target ramp and hold times
  • VFD speed control enables gentle blend to high-energy dispersion

Ventaja DOS

Advantage 2 — Hygienic Build & Easy Cleaning

  • SS304/316L with sanitary welds; internal Ra ≤0.6–0.8 µm for quick rinse-down
  • CIP/SIP spray ball, sanitary manway and tri-clamp ports reduce downtime
  • Mechanical seal on agitator; food-grade gaskets and valves
  • Options: load cells, sight glass, lights, recipe control, safety interlocks

Productos relacionados

Productos relacionados

PREGUNTAS FRECUENTES

La vida útil de un sistema de ósmosis inversa depende de la calidad del agua y del mantenimiento. Normalmente, la membrana dura entre 2 y 3 años, mientras que el sistema en sí puede durar más de 10 años con los cuidados adecuados.

Sí, todos nuestros sistemas son totalmente personalizables. Analizamos su informe de aguas y sus necesidades de aplicación antes de ofrecerle soluciones a medida.

Nuestros productos cumplen las normas CE e ISO 9001, y pueden diseñarse para cumplir normativas regionales o estándares industriales específicos si así se solicita.

Los sistemas estándar se envían en un plazo de 7-15 días. Para los pedidos personalizados, el plazo de entrega puede prolongarse hasta 20-25 días en función de la complejidad.

Sí. Proporcionamos documentación técnica completa, asistencia remota por vídeo y podemos enviar ingenieros al extranjero si así se solicita.

Nuestro presupuesto incluye el sistema de ósmosis inversa completo, el panel de control, las bombas, las unidades de pretratamiento y todos los accesorios necesarios. Si lo desea, podemos incluir herramientas de instalación y piezas de repuesto.

Productos preferidos
Scroll al inicio