전문적인 솔루션 제공

Customization Liquid Mixing tank Price of Chemical Mixing tank Juice Blending tank Agitator Mixer

Stainless steel mixing tank with agitator for liquid blending in food, beverage, chemicals and cosmetics. Custom-built in SS304/316L with volume from 100–10,000 L, optional heating/cooling jacket, insulation, VFD speed control and CIP/SIP spray ball. Ideal for juice blending, polymer make-up and general liquid mixing.

제품 설명

STARK designs and manufactures stainless steel mixing tank systems to deliver uniform, repeatable results across batch sizes. Depending on viscosity and process goals, the agitator can be propeller, turbine, or anchor/scraper with baffles to prevent vortexing. Variable-speed control allows gentle homogenization or high-shear dispersion when paired with a suitable impeller.

The vessel is fabricated from SS304/316L with sanitary welds and internal finish Ra ≤0.6–0.8 µm (typical). Options include a dimple or half-pipe heating/cooling jacket (steam, hot water, thermal oil or glycol), mineral-wool or PU insulation, load cells, temperature and level instrumentation, and top or bottom entry mechanical seal. A hinged manway and CIP spray ball speed up cleaning and changeover between recipes.

  • Open-top or closed-top with pressure/vacuum relief (atmospheric or slight pressure)
  • Sanitary tri-clamp ports, bottom outlet with butterfly/diaphragm valve
  • Skid or leg mounted; adjustable feet or casters
  • Control: local VFD panel or integrated PLC/HMI with interlocks and recipe steps

Note: Final sizing, impeller type and motor power are engineered from your product viscosity, target Reynolds number and heat load. We provide process datasheet review and CFD-inspired impeller selection on request.

제품 매개변수

Technical Parameters

MaterialsSS304 or SS316L (wetted parts); gasket EPDM/FKM; optional PTFE seats
Volume (usable)100 / 300 / 500 / 1000 / 2000 / 3000 / 5000 / 10,000 L (custom on request)
Finish (internal)Ra ≤0.6–0.8 µm; external 2B or hairline; electropolishing optional
AgitatorTop or bottom entry; propeller/turbine/anchor/scraper per duty; with baffles
Speed RangePropeller 100–1500 rpm; anchor 10–65 rpm (VFD adjustable)
Motor Power≈0.75–15 kW typical (engineered per volume and viscosity)
JacketDimple or half-pipe for heating/cooling; media steam/hot water/glycol/oil
InsulationPU/mineral wool with SS cladding (optional)
Design PressureAtmospheric standard; slight pressure/vacuum ±0.1–0.3 MPa optional
PortsTri-clamp manway, CIP spray ball, temperature PT100, level, vent, bottom outlet
MountingSkid or 3/4-leg stand; adjustable feet or casters
Electrical380–415 V/50 Hz or 460 V/60 Hz; protection IP55; food-grade cables
규정 준수Food-grade fabrication; pressure test & FAT; CE/UL components on request
참고Values are typical/configurable. Final BOM confirmed after datasheet review.

해당 산업

  • Food & Beverage — juice blending, syrup preparation, dairy mixing
  • Water Treatment — polymer/coagulant preparation, flocculant make-up
  • Chemical — emulsions, detergents, surfactants, additives
  • Cosmetics & Personal Care — lotions, shampoos, gel bases
  • Pharma & Biotech (non-pressure utility) — buffer/media prep
  • Paints & Coatings — dispersion and tint mixing

장점 1

Advantage 1 — Uniform Mixing & Thermal Control

  • Impeller matched to viscosity and Reynolds number for fast homogenization
  • Baffles minimize vortex and improve axial/radial flow
  • Heating/cooling jacket sized for target ramp and hold times
  • VFD speed control enables gentle blend to high-energy dispersion

이점 2

Advantage 2 — Hygienic Build & Easy Cleaning

  • SS304/316L with sanitary welds; internal Ra ≤0.6–0.8 µm for quick rinse-down
  • CIP/SIP spray ball, sanitary manway and tri-clamp ports reduce downtime
  • Mechanical seal on agitator; food-grade gaskets and valves
  • Options: load cells, sight glass, lights, recipe control, safety interlocks

관련 제품

자주 묻는 질문

역삼투압 시스템의 수명은 수질과 유지 관리에 따라 달라집니다. 일반적으로 멤브레인의 수명은 2~3년이며, 시스템 자체는 적절한 관리를 통해 10년 이상 지속될 수 있습니다.

예, 모든 시스템은 완벽하게 사용자 정의할 수 있습니다. 고객의 수질 보고서와 애플리케이션 요구 사항을 분석하여 맞춤형 솔루션을 제공합니다.

당사의 제품은 CE, ISO 9001을 준수하며 요청에 따라 특정 지역 규정 또는 산업 표준을 충족하도록 설계할 수 있습니다.

표준 시스템은 7~15일 이내에 배송됩니다. 맞춤형 주문의 경우 복잡성에 따라 리드 타임이 20~25일로 연장될 수 있습니다.

예. 전체 기술 문서와 비디오를 통한 원격 지원을 제공하며, 요청 시 엔지니어를 해외로 파견할 수 있습니다.

견적에는 전체 RO 시스템, 제어판, 펌프, 전처리 장치 및 필요한 모든 피팅이 포함됩니다. 요청 시 설치 도구와 예비 부품도 포함될 수 있습니다.

선호 제품
위로 스크롤