Português 
English 
Français 
Deutsch 
Русский 
العربية 
Español 
Nederlands 
Polski 
Bahasa Indonesia 
STARK suppliers Custom Ultrafiltration water treatment equipment 100T UF System
Secure precisely tailored water purification with STARK’s Custom Ultrafiltration water treatment equipment 100T UF System. As experienced suppliers, we specialize in providing fully customized Ultrafiltration water treatment equipment, engineered to your specific raw water conditions, flow rate requirements, and treated water quality goals for large-scale industrial applications.
Product Description
The need for high-quality water at a massive scale demands solutions that go beyond standard, off-the-shelf systems. STARK, as a leading supplier of Ultrafiltration water treatment equipment, understands this critical requirement. Our Custom Ultrafiltration water treatment equipment 100T UF System is engineered with a primary focus on customization, ensuring that every aspect of the system is precisely tailored to meet the unique challenges and demands of your large-scale water purification needs.
Ultrafiltration Water Treatment Equipment: Engineered for Your Specific Requirements
The core of our offering lies in our ability to deliver truly custom Ultrafiltration water treatment equipment. The “100T UF System” designation indicates a substantial base capacity, but the true value lies in the extensive customization options we provide. As your dedicated suppliers, we work closely with you to design a system that perfectly matches your specific parameters:
- Raw Water Source Analysis: We begin with a thorough analysis of your raw water source, identifying the specific contaminants and their concentrations. This crucial step allows us to select the most appropriate UF membrane type, pore size, and pre-treatment requirements for optimal performance and longevity.
- Flow Rate and Capacity Tailoring: While this system offers a 100T (100,000 liters per hour) base capacity, we can customize the system’s modular design to precisely match your required flow rates, ensuring efficient operation without over-sizing or under-sizing.
- Pre-treatment Integration: Based on your raw water analysis, we custom-engineer the integration of necessary pre-treatment stages, such as coagulation, flocculation, sedimentation, or media filtration, to protect the UF membranes and enhance overall system efficiency.
- Post-treatment Compatibility: We design the UF system to seamlessly integrate with any necessary post-treatment processes, such as disinfection or reverse osmosis, ensuring that your final water quality meets your exact specifications.
- Control System Customization: Our advanced PLC control systems can be fully customized to your operational preferences, including specific monitoring parameters, automated sequences, remote access capabilities, and integration with your existing plant management systems.
- Physical Footprint and Layout Optimization: We understand that space can be a constraint. Our engineering team will work with you to design a system layout that optimizes space utilization within your facility, ensuring efficient installation and maintenance access.
- Material Selection: While 304 or 316L stainless steel are standard for many components, we can customize material selection based on specific chemical compatibility requirements or budget considerations.
This bespoke approach ensures maximum efficiency, reduced operational costs, and unparalleled reliability for your specific water treatment challenge.
STARK Suppliers: Your Partner in Custom Ultrafiltration Solutions
As experienced suppliers of Ultrafiltration water treatment equipment, STARK is committed to providing not just a product, but a comprehensive solution tailored to your success. Choosing us as your supplier means you benefit from:
- Expert Engineering and Design Team: Our team of experienced engineers possesses in-depth knowledge of Ultrafiltration technology and will work collaboratively with you to design the optimal customized system.
- High-Quality Manufacturing: We adhere to stringent quality control standards throughout the manufacturing process, ensuring that your custom UF system is built to the highest levels of durability and performance.
- Comprehensive Support: From initial consultation and design to installation, commissioning, and ongoing technical support, STARK is your dedicated partner every step of the way.
- Competitive Wholesale Supply: As direct suppliers, we offer competitive wholesale pricing, providing excellent value for your investment in a customized Ultrafiltration water treatment solution.
Our Custom Ultrafiltration water treatment equipment 100T UF System exemplifies our commitment to providing tailored solutions that meet the most demanding water purification needs. Contact STARK today to discuss your specific requirements and let us engineer the perfect Ultrafiltration system for your application.
Product Parameter
Given the focus on customization, the technical parameters for the STARK suppliers Custom Ultrafiltration water treatment equipment 100T UF System will be largely driven by the specific client requirements. However, here are some general customizable parameters based on the core Ultrafiltration technology:
| Parameter | Specification / Customization Options |
|---|---|
| Core Keyword Focus | Ultrafiltration water treatment equipment design and capabilities. |
| Pure Water Capacity | 100 Tons per Hour (100,000 Liters Per Hour / 100 m³/hr) as a base, fully customizable based on client needs. |
| Filtration Technology | Ultrafiltration (UF) Membrane Filtration, customized for specific raw water. |
| Membrane Type | Hollow Fiber UF Membrane (PVDF, PES, PAN, etc.), selection customized based on feed water and desired filtrate quality. |
| Pore Size | Customizable (e.g., 0.01 – 0.1 µm) based on target contaminant removal. |
| Module Configurations | Fully customizable arrangement and number of industrial UF modules to achieve desired capacity and footprint. |
| Operating Mode | Outside-in or Inside-out flow; Dead-end or Cross-flow, optimized for the specific application. |
| Operating Pressure | Customizable within the typical UF range (0.05 – 0.3 MPa / 0.5 – 3 Bar / 7 – 43 PSI), optimized for energy efficiency and flux. |
| Raw Water Compatibility | Fully customizable to accommodate various sources including municipal, well, surface water, pre-treated wastewater, etc. Specific pre-treatment stages will be integrated based on raw water analysis. |
| Output Water Quality | Customizable based on client requirements (Turbidity < 0.1 NTU, SDI < 3, >6 log removal of bacteria, >4 log removal of viruses are typical targets, but can be adjusted). |
| Control System | Fully Automatic PLC Control with HMI, customized programming for specific monitoring, control sequences, remote access, and data logging requirements. Integration with SCADA systems is also customizable. |
| Power Supply | Customizable to meet local electrical standards (e.g., 380V/415V/460V, 50Hz/60Hz). |
| Construction Material |
|
| Dimensions | Fully customized skid-mounted or modular design to fit client’s specific space constraints and layout requirements. |
| Operating Temperature | Customizable within the typical UF membrane operating range (e.g., 5°C – 45°C), potentially wider with specialized membrane selection and system design. |
| Pre-treatment Integration | Coagulation, flocculation, sedimentation, media filtration (sand, carbon, multimedia), antiscalant dosing – fully customized based on raw water analysis. |
| Post-treatment Compatibility | Disinfection (UV, chlorination, ozonation), RO integration – designed for seamless integration with specified downstream processes. |
| Standards Compliance | Customizable to meet relevant international and local standards (e.g., ISO, CE, NSF, specific industry standards). |
| Supplier Focus | STARK – experienced suppliers offering custom design, manufacturing, and support. |
Applicable Industry
The STARK suppliers Custom Ultrafiltration water treatment equipment 100T UF System, with its emphasis on customization, is ideal for a wide range of large-scale industrial applications, including:
- Large Municipal Water Treatment Plants requiring tailored pre-treatment or primary filtration solutions for diverse surface water sources.
- Major Industrial Facilities (e.g., power generation, chemical processing, pulp & paper) needing high volumes of process water with specific purity requirements.
- Food & Beverage Processing Plants with large water demands for production, cleaning, and ingredient preparation, requiring systems tailored to their specific product lines and hygiene standards.
- Seawater Desalination Pre-treatment, where customized UF systems enhance the performance and longevity of large RO plants by effectively removing site-specific particulate matter and microorganisms.
- Advanced Wastewater Treatment and Water Reuse Projects, where UF is customized to meet stringent discharge limits or to produce high-quality reclaimed water for specific industrial or agricultural uses.
- Large-Scale Irrigation Systems requiring filtered water to prevent clogging and improve efficiency, with systems customized to the specific water source and irrigation infrastructure.
- Remote or Off-Grid Communities needing reliable and customizable large-scale water purification solutions tailored to local water sources and energy availability.
Advantage One
Advantage TWO
Related Products
Produtos Relacionados
- Equipamento de ultrafiltração
Chinese suppliers 4T/H Ultrafiltration Equipment 2T/H Reverse Osmosis System for water treatment
Adicionar ao orçamento - Equipamento de ultrafiltração
STARK suppliers Custom Ultrafiltration water treatment equipment 30T UF System
Adicionar ao orçamento
FAQ
Q1: How long does the reverse osmosis system last?
The lifespan of a reverse osmosis system depends on water quality and maintenance. Typically, the membrane lasts 2–3 years, while the system itself can last over 10 years with proper care.
Q2: Can the system be customized based on different water conditions?
Yes, all our systems are fully customizable. We analyze your water report and application needs before providing tailored solutions.
Q3: What standards does STARK equipment comply with?
Our products comply with CE, ISO 9001, and can be designed to meet specific regional regulations or industry standards upon request.
Q4: What is the delivery time for STARK RO systems?
Standard systems are shipped within 7–15 days. For customized orders, lead time may extend to 20–25 days depending on complexity.
Q5: Do you provide technical support or installation guidance?
Yes. We provide full technical documentation, remote guidance via video, and can dispatch engineers internationally upon request.
Q6: What is included in your quotation?
Our quotation includes the full RO system, control panel, pumps, pre-treatment units, and all necessary fittings. Installation tools and spare parts can be included upon request.
