تزويدك بحل احترافي

ar العربية
ar العربية en_US English fr_FR Français de_DE Deutsch ru_RU Русский pt_PT Português es_ES Español nl_NL Nederlands pl_PL Polski id_ID Bahasa Indonesia ja 日本語 ko_KR 한국어
Get a quick quote
5-micron-20-inch-pp-filter-housing-front
5-micron-20-inch-pp-filter-housing-front
5-micron-20-inch-pp-filter-kitchen-scene
5-micron-20-inch-pp-filter-product
5-micron-20-inch-pp-filter-lab-scene
5-micron-20-inch-pp-filter-housing-hero

مرشح 5 ميكرون 20 بوصة بولي بروبيلين بولي بروبيلين (رواسب ذائبة منفوخة) | STARK

فلتر 5 ميكرون 20 بوصة ص عيار 20 بوصة from STARK removes rust, sand and silt before RO membranes or POE systems. Melt-blown polypropylene with gradient-depth structure delivers high dirt-holding capacity and stable flow; fits standard 2.5″ × 20″ housings.

Get a quick quote

Product Description

This melt-blown polypropylene cartridge uses a graded-density process: fibers are denser toward the core and more open at the outer layer, so larger particles are captured first and finer particles inside. The result is higher dirt-holding capacity, lower pressure drop and longer service life compared with single-density filters.This 5 micron 20 inch pp filter uses graded-density melt-blown media to capture coarse-to-fine particles with lower initial pressure drop.

When staged with carbon and RO, a 5 micron 20 inch pp filter protects downstream elements and extends service intervals.

It is commonly installed as a pre-filter for reverse osmosis, whole-house systems and industrial process lines to protect downstream carbon filters, softeners and RO membranes. The 5 µm nominal rating is a balanced choice for general sediment control and turbidity reduction; other ratings are available to match feed quality and target protection.

  • 100% polypropylene media — no binders, adhesives or additives
  • Low fiber release and chemical compatibility across typical pH ranges
  • Double open end (DOE) standard; fits most 2.5″ x 20″ housings
  • Recommended change-out at ΔP ≈ 0.1 MPa (≈15 psi) or by outlet turbidity

Product Parameter

Technical Parameters

Construction100% melt-blown polypropylene, gradient-depth
Size2.5″ × 20″ (OD ≈ 63–65 mm; length 508 mm; ID ≈ 28 mm)
Micron Rating5 µm nominal (1/10/20/50 µm available)
Efficiency (nominal)~90% at rated micron (typical)
Max Operating Temp≤ 60 °C (140 °F)
Max Operating Pressure≤ 0.6 MPa (6 bar) — per housing limits
Recommended Change-outΔP ≈ 0.1 MPa (15 psi) or quality threshold
End StyleDOE (double open end), flat gaskets; 222/226 adaptors optional
CoreSelf-supported; PP core optional for high ΔP
Flow (water)~12–16 L/min for 20″ @ ΔP 0.07 MPa (indicative)
Chemical CompatibilityPP suitable for pH ~1–13 (verify with specific chemicals)
ApplicationsSediment removal prior to carbon/RO/softener; point-of-entry & process lines
الملاحظاتValues are typical and configurable; final BOM confirmed after your feed analysis.

Note: Final BOM and micron options are configurable; the 5 micron 20 inch pp filter is our general-purpose rating.

Applicable Industry

  • Reverse osmosis pretreatment — membrane protection
  • Whole-house POE systems — turbidity and sediment control
  • Food & beverage production water — pre-filtration
  • Electronics/metal finishing — rinse water clarity
  • Commercial buildings & campuses — central filtration
  • Laboratory/pilot lines — reliable particulate removal

Advantage One

Advantage 1 — High Dirt-Holding & Stable Flow

  • Gradient-depth structure captures coarse-to-fine particles through the media
  • Low initial pressure drop helps maintain system flow and pump efficiency
  • Nominal 5 µm rating suits general-purpose sediment control
  • Multiple micron options allow precise staging with carbon/RO

Advantage TWO

Advantage 2 — Clean Material & Easy Service

  • 100% polypropylene media — no binders or resins
  • Double open end for fast replacement in standard 2.5″ × 20″ housings
  • Good chemical compatibility across typical water-treatment chemistries
  • OEM label and carton available for project rollouts

Related Products

منتجات ذات صلة

الأسئلة الشائعة

يعتمد عمر نظام التناضح العكسي على جودة المياه والصيانة. عادةً ما يدوم الغشاء من 2-3 سنوات، بينما يمكن أن يدوم النظام نفسه لأكثر من 10 سنوات مع العناية المناسبة.

نعم، جميع أنظمتنا قابلة للتخصيص بالكامل. نقوم بتحليل تقرير المياه الخاص بك واحتياجات التطبيق قبل تقديم حلول مصممة خصيصًا.

تتوافق منتجاتنا مع معايير CE وISO 9001، ويمكن تصميمها لتلبية لوائح إقليمية أو معايير صناعية محددة عند الطلب.

يتم شحن الأنظمة القياسية في غضون 7-15 يومًا. بالنسبة للطلبات المخصصة، قد تمتد المهلة الزمنية إلى 20-25 يومًا حسب درجة التعقيد.

نعم. نحن نقدم وثائق فنية كاملة، وإرشادات عن بُعد عبر الفيديو، ويمكننا إرسال مهندسين دوليًا عند الطلب.

Our quotation includes the full RO system, control panel, pumps, pre-treatment units, and all necessary fittings. Installation tools and spare parts can be included upon request.

المنتجات المفضلة
انتقل إلى الأعلى