The order of chemical cleaning of reverse osmosis membranes depends mainly on the type of contaminants. In general, the recommended cleaning order is to perform alkaline cleaning first and then acid cleaning. The followi
Semiconductor ultrapure water equipment is a high-purity water equipment used in the manufacture of semiconductors, flat panel displays, optoelectronic devices and other microelectronic fields. This article will intro
1.Cartridge filter The size of the filter varies according to the amount of water filtered. The most common are sand filters, non-woven filters, and PP fiber filters. The lengths of non-woven filters and PP fiber fi
Analysis of commonly used professional names in chemical water treatment 16. Turbidity; also known as turbidity. From a technical point of view, turbidity is a water quality substitute parameter used to reflect the cont
Analysis of commonly used professional names in chemical water treatment 1. Surface water: refers to water that exists on the surface of the earth's crust and is exposed to the atmosphere. It is a general term for f
During the daily reverse osmosis equipment operation, scaling is not uncommon in some areas. The main reasons are as follows: 1. The design water quality does not conduct a full water quality analysis, resulting in scal
Nanofiltration of high-salt wastewater----Related configurations of reverse osmosis salt separation device The produced water flow is 77m3/h, the design recovery rate is 70%, the design flux is 16.5LMH, and the sulfat
1. Storage of new ultrafiltration membranes components Ensure that the original packaging of the ultrafiltration membranes components is intact and stored in a dark and cool place (temperature range of 0 to 40°C),