what is water pump

Energy conservation and emission reduction have become the main content of China's economic development plan, especially for power, steel, non-ferrous metals, petrochemicals, water treatment and other industries with high energy consumption, more stringent emission reduction policies have been put forward. As the fluid conveying equipment in the industrial center, the water pump occupies the main part of energy consumption, and it has become the main problem to be solved in the energy saving operation.

The most common way to drive the water pump is to drive it with an electric motor. The energy saving method of the pump is mainly to make the pump unit (pump, prime mover and conversion part) run at the highest power, so that the electric energy consumed by the external input is reduced to the lowest point. The energy saving of the pump is a comprehensive technology, which involves the energy saving of the pump itself, the energy saving of the system and the operation of the application management.

Water pumps have different uses, different conveying liquid media, different flow rates, and different lift ranges. Therefore, of course, their structural forms and materials are also different. To sum up, they can be roughly divided into: 1. Urban water supply 2 , sewage system 3, civil engineering, building system 4, agricultural water conservancy system 5, power station system, 6, chemical system 7, petroleum industry system 8, mining and metallurgy system 9, light industry system 10, ship system.

1. If the water pump has any small fault, remember not to let it work. If the packing of the water pump shaft is worn out, it should be added in time. If the water pump is continued to be used, air will leak.

2. If the water pump vibrates strongly during use, be sure to stop and check the cause, otherwise it will also cause damage to the pump.

3. The water pump must be maintained after use. For example, when the water pump is used up, the water in the water pump should be cleaned up. It is best to remove the water pipe and rinse it with clean water.

4. The tape on the water pump should also be removed, then rinsed with water and dried in the light. Do not put the tape in a dark and humid place. The tape of the water pump must not be stained with oil, let alone some sticky things on the tape.