Memberi Anda solusi profesional

id_ID Bahasa Indonesia
id_ID Bahasa Indonesia en_US English fr_FR Français de_DE Deutsch ru_RU Русский pt_PT Português ar العربية es_ES Español nl_NL Nederlands pl_PL Polski ja 日本語 ko_KR 한국어
Dapatkan penawaran cepat
5-micron-20-inch-pp-filter-housing-front
5-micron-20-inch-pp-filter-housing-front
5-micron-20-inch-pp-filter-kitchen-scene
5-micron-20-inch-pp-filter-product
5-micron-20-inch-pp-filter-lab-scene
5-micron-20-inch-pp-filter-housing-hero

Filter PP 5 Mikron 20 Inchi (Sedimen Meleleh-Terbakar) | STARK

Filter pp 5 mikron 20 inci from STARK removes rust, sand and silt before RO membranes or POE systems. Melt-blown polypropylene with gradient-depth structure delivers high dirt-holding capacity and stable flow; fits standard 2.5″ × 20″ housings.

Dapatkan penawaran cepat

Deskripsi Produk

This melt-blown polypropylene cartridge uses a graded-density process: fibers are denser toward the core and more open at the outer layer, so larger particles are captured first and finer particles inside. The result is higher dirt-holding capacity, lower pressure drop and longer service life compared with single-density filters.This 5 micron 20 inch pp filter uses graded-density melt-blown media to capture coarse-to-fine particles with lower initial pressure drop.

When staged with carbon and RO, a 5 micron 20 inch pp filter protects downstream elements and extends service intervals.

It is commonly installed as a pre-filter for reverse osmosis, whole-house systems and industrial process lines to protect downstream carbon filters, softeners and RO membranes. The 5 µm nominal rating is a balanced choice for general sediment control and turbidity reduction; other ratings are available to match feed quality and target protection.

  • 100% polypropylene media — no binders, adhesives or additives
  • Low fiber release and chemical compatibility across typical pH ranges
  • Double open end (DOE) standard; fits most 2.5″ x 20″ housings
  • Recommended change-out at ΔP ≈ 0.1 MPa (≈15 psi) or by outlet turbidity

Parameter Produk

Technical Parameters

Construction100% melt-blown polypropylene, gradient-depth
Size2.5″ × 20″ (OD ≈ 63–65 mm; length 508 mm; ID ≈ 28 mm)
Micron Rating5 µm nominal (1/10/20/50 µm available)
Efficiency (nominal)~90% at rated micron (typical)
Max Operating Temp≤ 60 °C (140 °F)
Max Operating Pressure≤ 0.6 MPa (6 bar) — per housing limits
Recommended Change-outΔP ≈ 0.1 MPa (15 psi) or quality threshold
End StyleDOE (double open end), flat gaskets; 222/226 adaptors optional
CoreSelf-supported; PP core optional for high ΔP
Flow (water)~12–16 L/min for 20″ @ ΔP 0.07 MPa (indicative)
Chemical CompatibilityPP suitable for pH ~1–13 (verify with specific chemicals)
ApplicationsSediment removal prior to carbon/RO/softener; point-of-entry & process lines
CatatanValues are typical and configurable; final BOM confirmed after your feed analysis.

Note: Final BOM and micron options are configurable; the 5 micron 20 inch pp filter is our general-purpose rating.

Industri yang Berlaku

  • Reverse osmosis pretreatment — membrane protection
  • Whole-house POE systems — turbidity and sediment control
  • Food & beverage production water — pre-filtration
  • Electronics/metal finishing — rinse water clarity
  • Commercial buildings & campuses — central filtration
  • Laboratory/pilot lines — reliable particulate removal

Keuntungan Satu

Advantage 1 — High Dirt-Holding & Stable Flow

  • Gradient-depth structure captures coarse-to-fine particles through the media
  • Low initial pressure drop helps maintain system flow and pump efficiency
  • Nominal 5 µm rating suits general-purpose sediment control
  • Multiple micron options allow precise staging with carbon/RO

Keuntungan DUA

Advantage 2 — Clean Material & Easy Service

  • 100% polypropylene media — no binders or resins
  • Double open end for fast replacement in standard 2.5″ × 20″ housings
  • Good chemical compatibility across typical water-treatment chemistries
  • OEM label and carton available for project rollouts

Produk Terkait

Produk Terkait

PERTANYAAN YANG SERING DIAJUKAN

Umur dari sistem reverse osmosis tergantung pada kualitas air dan pemeliharaan. Biasanya, membran bertahan selama 2-3 tahun, sedangkan sistem itu sendiri dapat bertahan lebih dari 10 tahun dengan perawatan yang tepat.

Ya, semua sistem kami dapat disesuaikan sepenuhnya. Kami menganalisis laporan air dan kebutuhan aplikasi Anda sebelum memberikan solusi yang disesuaikan.

Produk kami memenuhi CE, ISO 9001, dan dapat dirancang untuk memenuhi peraturan regional atau standar industri tertentu berdasarkan permintaan.

Sistem standar dikirim dalam waktu 7-15 hari. Untuk pesanan yang disesuaikan, waktu tunggu dapat diperpanjang hingga 20-25 hari tergantung pada kerumitannya.

Ya. Kami menyediakan dokumentasi teknis lengkap, panduan jarak jauh melalui video, dan dapat mengirimkan teknisi secara internasional berdasarkan permintaan.

Kutipan kami mencakup sistem RO lengkap, panel kontrol, pompa, unit pra-perawatan, dan semua perlengkapan yang diperlukan. Alat instalasi dan suku cadang dapat disertakan berdasarkan permintaan.

Produk pilihan
Gulir ke Atas